In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the house, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it’s actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be https://dogsrecommend.com/dog-mask/ realistic with what type of paper plate which you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can ensure that nothing will leak when you put the mask on. Be sure the edges are cut so the edges are not sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you’re done, so you don’t wind up with smudges or smears on your dog.
Then it is time to paste the mask on your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Be sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Be sure the ears are level and be sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you’ll have to do some sanding to be certain it’s secure on your dog. You can do this by sanding off any excess paper which might have been removed from your mask.